PRODUCT CODE SUN2000-30KTL-M3

Huawei 30 kW Inverter – On-grid

Description

Three-phase inverter with an output power of 33,000 VA (*1)

4 independent MPP trackers

8 DC connectors

Efficiency up to 98.7%

Communication via WLAN / Ethernet and 2G/3G/4G/LTE*

Free system monitoring with FusionSolar

RS485 for smart power sensor and SmartLogger

Connection for ripple control receiver

DC MBUS communication for smart optimizers

Integrated AC and DC surge protection Type II

Integrated PID recovery

Convection cooling

Protection degree IP66

Huawei SUN2000-30KTL-M3 – General specifications

Operating temperature range: -25 ~ +60 °C
Relative operating humidity: 0% RH ~ 100% RH
Operating altitude: max. 4,000 m
Cooling: convection cooling
Weight (with mounting plate): 43 kg
Noise level: < 46 dB
Dimensions: 640 x 530 x 270 mm
DC connection: Stäubli MC4
AC connection: cable ends on M8 terminal pins
Protection index (according to IEC 60529): IP66
Topology: transformerless
Night power consumption: ≤ 5.5 W
DC MBUS compatible optimizer: SUN2000-450W-P

Huawei SUN2000-30KTL-M3 – DC input

Maximum input voltage: 1100 V (*2)
Maximum current per MPPT: 26 A
Maximum short-circuit current per MPPT: 40 A
Start-up voltage: 200 V
MPPT operating voltage range: 200 V up to (*3) 1000 V
Nominal input voltage: 600 V
Number of MPP trackers: 4
Maximum inputs per MPPT: 2

Huawei SUN2000-30KTL-M3 – AC output

Nominal power: 30,000 W
Maximum apparent power: 33,000 VA 1
Nominal output voltage: 230 Vac / 400 Vac, 3W/N+PE
AC grid frequency: 50 Hz / 60 Hz
Nominal output current: 43.3 A
Maximum output current: 47.9 A
Adjustable power factor: 0.8 capacitive … 0.8 inductive
Total harmonic distortion (THD): ≤ 3%

Huawei SUN2000-30KTL-M3 – Efficiency

Maximum efficiency: 98.7%
EU efficiency: 98.4%

Huawei SUN2000-30KTL-M3 – Communication

Display: LED
RS485: Yes
USB: WLAN/Ethernet via Smart Dongle-WLAN-FE (optional), 4G/3G/2G via Smart Dongle-4G (optional)
BUS monitoring (MBUS): yes (an isolation transformer is required)

Huawei SUN2000-30KTL-M3 – Protection and features

DC switch-disconnector: Yes
Island grid detection: Yes
AC overcurrent protection: Yes
DC reverse polarity protection: Yes
String monitoring: Yes
DC overvoltage arrester: Yes
AC overvoltage protection: Yes
DC insulation resistance detection: Yes
Residual current monitoring: Yes
Arc detection: Yes
Inputs for ripple control receiver, PID Recovery: Yes (*3)

DC switch
Grid detection
AC overcurrent protection
DC reverse polarity protection
String monitoring
DC overvoltage arrester
AC overvoltage protection
DC insulation resistance detection
Residual current monitoring
Arc detection
Inputs for ripple control receiver, PID Recovery (*3)

Huawei SUN2000-30KTL-M3 – Safety standards

EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683

Huawei SUN2000-30KTL-M3 – Connector standards

IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699, PO 12.3, RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7, NRS 097-2-1, AS/NZS 4777.2, DEWA

Additional information on compliance with standards is available upon request.

Huawei SUN2000-30KTL-M3 – Included in the box upon purchase

PV connector
Bluetooth device
Bracket

Huawei SUN2000-30KTL-M3 – Notes

1 For Austria: complies with TOR manufacturer type A:2019-12 and OVE R25:2020-03 guideline. Max. AC output line limited to 30,000 VA.
2 The maximum input voltage is the upper limit of the DC voltage. Any DC input voltage higher than this may damage the inverter.
3 Any DC input voltage above the operating voltage range may cause malfunction.
4 SUN2000-30KTL-M3 increases the potential between PV and ground above zero through the integrated PID recovery function. Supported module types include: P-Type (Mono, Poly)